-
ST - BAR
다양한 강종, 완벽한 품질보증, 신속대응을 통해
대한민국 스테인레스의 길을 지키고 있습니다. -
니켈 알로이
니켈알로이 전문업체로써 최고의 품질과
최선의 서비스로 고객들에게 다가가고 있습니다. -
CD - BAR
수십년동안 CD BAR 실수요 유통 분야에서 변하지 않는
입지를 보여주기 위해 최선을 다하고 있습니다.
Nickel200 (N02200)

니켈 함량이 99.6%나 되는 순 니켈로서 가장 강한 재질중의 하나이다. 기계적 성질이 뛰어나고, 가스 함량이 낮으며, 낮은 증기압과 자성을 지니며 열전도율과 전기 전도율이 높다. 이러한 성질들로 인해 가공성이 좋고 내부식성이 뛰어나다. 315°C 이하의 환경에서 유용하며 중성이나 알카리성 해수에 내부식성이 강하고 증류수에서도 낮은 부식성을 자랑한다. 어떤 형태로도 열간 성형이 가능하고 많은 방법에 의해 냉간성형이 이뤄진다. / Nickel 200 is 99.6% pure nickel, one of the toughest metals. The Nickel 200's characteristics include excellent mechanical properties, a low gas content, low vapor- pressure, magnetic properties, high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environment. Nickel 200 is useful in any environment below 600º F. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water. The metal can be hot formed to any shape and formed cold by all methods.
Nickel201 (N02201)

Nickel200에 비해 탄소치가 낮지만 특성은 거의 똑 같음. / Nickel 201 is the low-carbon version of Nickel 200. The Nickel 201’s has the same characteristics as the Nickel 200. These properties and its chemical composition make Nickel 201 fabricatable and highly resistant to corrosive environment. Nickel 201 is useful in any environment above 600 ºF. It is highly resistant to corrosion by neutral and alkaline salt solutions, fluorine and chlorine. Nickel 201 also has low corrosion rates in neutral and distilled water. The metal can be hot formed to any shape and formed cold by all methods.
Monel400 (N04400)

냉간 작업을 통해서만 경화가 이뤄지는 니켈-구리 합금임. 유동성 해수에 의한 부식율이 낮기 때문에 해양 장비 용도로 널리 사용되어진다. 대부분의 담수 환경하에서 응력 부식 균열에 탁월한 내성을 지니고 있다. 577°C까지 사용될 수 있고, 영하의 기온에서도 뛰어난 기계적 특성을 발휘한다./ Monel 400® is a nickel-copper alloy that is hardened by cold working only. Monel 400® has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwaters. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.
Monel K500 (N05500)

Monel K-500®은 Monel 400®과 같은 특성과 내부식성을 가진 니켈-구리 합금임. 알루미늄과 티타늄 첨가로 인해 모넬400에 비해 보다 더 큰 강도와 경도를 지닌다. 몇몇 환경에서는 시효 경화 조건에 있어서 더 큰 응력 부식 균열 성향을 가지는 경향이 있다. / Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.
Inconel600 (N06600)

Inconel 600®은 열과 부식에 강하고 기계적 가공성이 좋다. 강도가 높고 쉽게 원하는 형태를 만들 수 있다. 냉간 작업을 통해서만 강화와 경화가 이뤄진다. / Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work.
Inconel601 (N06601)

Inconel 601은 표준적인 공업 재료이고 열과 부식에 강하고 높은 강도와 가공성을 가지고 있다. 냉간 가공을 통해서만 강도를 높일 수 있다 / Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work.
Inconel617 (N06617)

Inconel 617®의 주 구성 성분인 니켈, 크롬, 코발트 및 몰리브덴으로 인해 산화화 탄화에 강한 내성을 지니게 한다. Inconel 617® consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weldability.
Inconel625 (N06625)

Inconel® 625은 비 자성을 띄며, 부식과 산화에 내성이 있는 니켈 기반의 합금이다. 니켈-크롬 바탕하에 내열성 물질과 콜럼븀, 몰리브덴의 고체 용해 효과에 기인해서 극저온에서 1093°C에 이르는 고온에 이르기까지 높은 강도를 지님. 염화 이온에 대해 탁월한 피로 강도와 응력-부식 균열 내성을 가진다. / Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.
Inconel718 (N07718)

Alloy 718은 704°C까지의 온도에서 특별히 높은 항복, 인장 및 크리프 파단 강도 특성을 보이도록 설계된 석출 경화형 니켈 기반의 합금이다. / Alloy 718의 시효 경화 반응성은 가열이나 냉각시 자연적인 경화없이 풀림과 용접을 가능하게 해준다. 알루미늄과 티타늄에 의해 경화가 이뤄지는 니켈 기반의 슈퍼합금과 비교해서 탁월한 용접성을 보여준다. Alloy 718 is a precipitation hardenable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weldability when compared to the nickel-base super alloys hardened by aluminum and titanium.
Inconel X-750 (N07750)

Inconel X-750®은 뛰어난 내부식성과 내산화성 및 704°C까지의 온도하에서 높은 강도를 가지는 니켈-크롬 합금이다. 일반적인 제작 표준 형태로 이용 가능하므로 다양한 응용제품으로 사용되어진다. / Inconel X-750® is a nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300º F. Inconel X-750® is available in all standard mill forms therefore, it is used for a wide variety of applications.
Incoloy800/800H/800HT (N08800/N08810/N08811)

알루미늄, 탄소, 티타늄 함유물로 인해 높은 크리프 파단 강도를 가지는 니켈-철-크롬 합금임. / Incoloy 800/800H/800HT® is nickel-iron-chromium alloy. The alloys’ higher creep-rupture strength is the result of aluminum, carbon, and titanium contents.
Incoloy825 (N08825)

Incoloy 825®는 티타늄, 구리, 몰리브덴이 첨가된 니켈-철-크롬 합금이다. Incoloy 825®의 화학적 구성은 국부 부식, 틈새 부식, 입계 부식, 응력 부식 균열과 같은 많은 부식 환경하에서 강한 내성을 제공한다. 적정온도에서부터 고온하에서까지 기계적 특성이 좋고 571°에서 1176°C까지의 열간 작업이 가능하다. 기존 공정하에서의 용접성이 좋다. / Incoloy 825® is a nickel-iron-chromium alloy with titanium, copper, and molybdenum. Incoloy® 825’s chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, intergranular corrosion, and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weldability by all conventional processes.
Hastelloy C22 (N06022)

Hastelloy C22®은 피팅, 틈새 부식, 입계 부식, 응력 부식 균열 등과 같은 일반적인 부식에 내성을 가진다. 크롬, 몰리브덴, 텅스텐 및 철을 함유하고 있어서 고여 있거나 또는 흐르는 해수에서 내부식성을 지닌다. 가스 텅스텐 아크, 가스 금속 아크 및 피복 금속 아크 용접에 쓰인다. / Hastelloy C22® provides resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Hastelloy C22® contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal-arc, and shielded metal-arc processes.
Hastelloy C276 (N10276)

니켈-몰리브덴-크롬 합금으로 가혹한 환경하에서 뛰어난 내부식성을 가짐. 높은 함유량의 몰리브덴은 특히 국부적인 부식이나 균열에 강성을 가지게 함. 낮은 탄소 함유치는 용접 구조물에서의 내부식성을 유지하도록 탄화물 석출을 최소화해준다. / Hastelloy C-276® is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures
Hastelloy B-2 (N10665)

Hastelloy B-2®는 여하한 농도와 온도하에서도 염산에 대한 뛰어난 내식성을 가지는 니켈 기반의 단조 합금(Wrought Alloy)이다. 그러므로 응력부식균열과 피팅에 내성이 좋다. / Hastelloy B-2® is a nickel-base wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Therefore, it has great resistance to stress-corrosion cracking and pitting.
Hastelloy X (N06002)

산화에 강한 니켈-크롬-철-몰리브뎀 합금으로 다양한 형태로 이용가능하며, 섭씨 1204도(2200F)에서도 뛰어난 인장강도와 내산화력을 보유하고 있다. 열간 성형을 위해서는 1175°C에서 가열을 해야 한다. 메탈 아크, 가스-텅스텐-아크, 가스-메탈-아크 및 서브머지드 아크공정으로 용접할 수 있다. / Inconel HX®, also known as Hastelloy X® is a nickel- chromium-iron-molybdenum alloy with great resistance to oxidation. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe, and tube. The alloy’s oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX® can be welded by metal arc, gas-tungsten- arc, gas-metal-arc, and submerged arc processes.
Al6XN (N08367)

염소 공식(孔蝕)과 틈새 부식에 탁월한 내식성을 가지는 니켈-몰리브뎀 합금으로 높은 연성과 충격 강도를 가지고 있다 / UNS N08367 also commonly referred to as AL-6XN® alloy is a nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion. UNS N08367 retains high ductility and impact strength.
Alloy330 (N08330)

Incoloy® 330은 니켈 및 크롬 함량이 높아서 탄화, 산화 및 질화에 내성이 좋다. 모든 기존의 방식으로 용접이 용이하고, 1750-1200° F 사이의 온도에서 열간이 가능하며, 냉간 가공도 가능하다 / Incoloy® 330 is high in nickel and chromium that provides good resistance to carburization, oxidation, and nitridation. Incoloy® 330 is welded easily by all conventional processes; it can be formed hot (between 1750-1200° F) and cold.